Miscellaneous

FAQ
How do the Frog & Bug Pods attach to the wall?
The
Frog Pod and the Bug Pod both attach to the bathtub wall with either
super-strong adhesive strips or screws. You may choose which option to
use. We also offer a suction cup option as well as a silicone adhesive
option, both sold separately. How much weight will the Frog & Bug Pods hold?
The
amount of weight the Frog Pod or Bug Pod can hold varies, depending on
the mounting option used. The adhesive strip option will hold up to 10
lbs. of toys and accessories and the screw-mounting option will hold up
to 20 lbs. The suction cup option will hold up to 5 lbs. and the
silicone adhesive option will hold up to 10 lbs. What kind of adhesive is used on the Frog Pod & the Bug Pod?
The
Frog & Bug Pods come with four super-strong adhesive strips already
attached to the wall bracket. This unique adhesive creates a
semi-permanent bond that will withstand moisture. The adhesive can be
removed and will not leave any residue on wall surfaces. What type of wall surface should the Frog or Bug Pod be mounted on?
The
adhesive strips and the suction cups both require a smooth, flat
surface for mounting. Acrylic, glass, and fiberglass surfaces, as well
as ceramic tile, are ideal for mounting the Frog & Bug Pods using
the adhesive strips or the suction cups. Are there any surfaces that should be avoided when using the adhesive strips?
The
adhesive will not stick to silicone tile, estimated to be 2-3% of all
household tile. When using either the adhesive strips or the suction
cups, avoid surfaces that are textured, pebbled, or uneven, as well as
surfaces with very small tiles. It is also important to avoid mounting
the Frog Pod or Bug Pod on a curved surface, such as in the corners of
fiberglass showers. Can the adhesive strips on the mounting bracket be reused if my Frog Pod or Bug Pod is removed from the wall?
No,
the adhesive strips are meant for one-time use only. When the adhesive
is first attached, a chemical bond is created and removing the adhesive
breaks this bond. Replacement adhesive strips can be purchased from Boon's online store. How long do I have to wait after mounting the Frog Pod or Bug Pod before using the tub or shower?
Leave
the mounting bracket hanging by itself for 24 hours. During this time,
avoid moisture and the use of cleaning chemicals near the bracket.
Avoid putting unnecessary pressure on the bracket for the first 72
hours. After this time, the semi-permanent bond will be thoroughly set
and the Frog Pod or Bug Pod will be ready for regular use. How should I prepare my wall surface before mounting the bracket with the adhesive strips or the suction cups?
The
surface must be thoroughly cleaned and dry before attaching either the
adhesive strips or the suction cups. First, use a bathroom cleaner to
remove all dirt and residue from the surface. Be sure to rinse all
cleaner residue from the surface as well. Next, use rubbing alcohol
(without emollients) to wipe the surface and let dry thoroughly before
attaching the bracket. Will temperature affect the quality of the adhesive bond?
The
adhesive requires that the initial bond be created on a wall surface
that is above 70 F degrees. Ideally, the wall temperature should remain
above 70 F degrees for the initial 24 hour period. Will hard water deposits affect the quality of the adhesive bond?
It
is best to avoid areas of the shower/tub surface where there could be
hard water deposits because the adhesive may not stick to these
surfaces. If you do have hard water, we recommend using a cleaner made
specifically for removing hard water deposits before using alcohol to
wipe the mounting surface. How do I remove the adhesive strip mounting bracket?
To
remove the adhesive strip mounting bracket, use a flat object, such as
a screwdriver or a butter knife (covered with a soft cloth to avoid
scratching the wall surface), to pry up the corner of one adhesive
strip. The remaining adhesive strips can then be released from the wall
(with a bit of elbow grease!) After loosening the first strips, rotate
the bracket to release the remaining strips. Any adhesive remaining on
the wall can be easily pulled off. If I decide to move my Frog or Bug Pod, can I get replacement adhesive strips to re-hang it?
Replacement adhesive strips can be purchased from Boon's online store. Do you have any suggestions to help ensure a good bond when using the adhesive strips?
- It
is very important that you place the bracket onto the wall in its
proper position only once. After it is placed on the wall, do not try
to remove and reposition it as this will prevent the adhesive strips
from adhering to the wall.
- To attach bracket to the bathtub/shower wall, select an area where strips are touching the least amount of grout.
- It
is important to maintain a wall surface temperature above 70˚F from the
time you first place the bracket onto the wall and throughout the
entire 24 hour period before attaching the base. If you are mounting
the bracket on an exterior wall during cold weather, it may be
necessary to increase the room temperature during this time.
- When
placing the bracket onto the cleaned wall surface, use thumb to press
firmly over each of the adhesive strips. Rub while pressing to remove
any air bubbles between adhesive strips and wall surface. If adhesive
strips cross grout lines, be sure to firmly press adhesive into
recessed areas.
|